Product Highlights
Super White & Super Strength
Extra
Coverage
Made From Indian & Imported Gypsum
Special Power Packing
Features
- Faster to apply and quicker setting time than traditional sand cement plaster.
- Tensile strength of 7.6 kg/cm2 and Traverse Strength of 47 kg/cm2.
- ISI and ISO certified non-combustible, high-quality products.
- High Thermal Resistance R = 0.07m²K/W at 13mm thickness.
Benefit & Advantages
- Gives the structure an ultra-super-white finish.
- Saves time and resources.
- Strengthens the structure after hardening.
- Zero to Low maintenance and longer life span.
- Keeps temperature down in summer and high in winter.
Specifications
| Setting Time | 15-20 min |
| Residue | 2% – 4% |
| Whiteness | 75%-80% |
| ISO-Certified | Yes |
| ISI-Certified | Yes |
| Wastage | NIL |
| Transverse Strength (kg/cm²) | 18-22 |
| Compressive Strength (N/mm²) | 3-5 |
| Density (kg/m³) | 700-750 |
| Chemical Composition | Calcium Sulphate Hemihydrate [CaSO₄.1/2H₂O] |
| Water to Material Ratio | 1 : 1.25 |
| Coverage (1kg) | 1 sq.ft. with 12mm thickness |
| Shelf Life | 12 months From the date of manufacturing, when stored is dry conditions |
Note: Mix powder in water, not vice versa.
(*All tested results are under lab condition)
Surface Preparation
- Before applying, remove any dust, loose particles, oil, traces of adhering material from the surfaces.
- It’s better to use sandpaper, putty blade or wire brush to help it clean.
- To achieve good workability and higher coverage always pre-wet the surface before application.
- All holes and cracks on the surface of the brick wall should be repaired before plastering.
- Hacking is necessary before application.
Applications
- Expert Plaster is mostly applied as a protective coating on walls and ceilings.
- It is also used as a molding and casting agent for decorative items and elements.
- It is required to give aesthetic finishing touches to the structures that beautify them.
- Because of its fire-resistant nature, it is also used to avoid fire hazards in a building.
Project – Hilton
Trimurti expert P.O.P has been an integral part of finishing and designing the interior.
Specifications
| Setting Time | 15-20 min |
| Residue | 2% – 4% |
| Whiteness | 75%-80% |
| ISO-Certified | Yes |
| ISI-Certified | Yes |
| Wastage | NIL |
| Transverse Strength (kg/cm²) | 18-22 |
| Compressive Strength (N/mm²) | 3-5 |
| Density (kg/m³) | 700-750 |
| Chemical Composition | Calcium Sulphate Hemihydrate [CaSO₄.1/2H₂O] |
| Water to Material Ratio | 1 : 1.25 |
| Coverage (1kg) | 1 sq.ft. with 12mm thickness |
| Shelf Life | 12 months From the date of manufacturing, when stored is dry conditions |
Note: Mix powder in water, not vice versa.
(*All tested results are under lab condition)
Surface Preparation
- Before applying, remove any dust, loose particles, oil, traces of adhering material from the surfaces.
- It’s better to use sandpaper, putty blade or wire brush to help it clean.
- To achieve good workability and higher coverage always pre-wet the surface before application.
- All holes and cracks on the surface of the brick wall should be repaired before plastering.
- Hacking is necessary before application.
Applications
- Expert Plaster is mostly applied as a protective coating on walls and ceilings.
- It is also used as a molding and casting agent for decorative items and elements.
- It is required to give aesthetic finishing touches to the structures that beautify them.
- Because of its fire-resistant nature, it is also used to avoid fire hazards in a building.
