Tile Adhesive (Platinum)

Adding a final touch of a makeover by putting fashioned tiles can be a sophisticated idea, for which our exclusive tile adhesive formulation is applicable in various functionalities for all kinds of ceramic and porcelain tiles. It serves a greater purpose of holding tiles onto the surface, be it on the flat ground or on the vertical wall, and sticks them hard so they never fall off. Offering a great strength and bonding for longer life, our tile adhesive is useful in fixing tiles to walls, tile on tile, floor and wall stones, swimming pool tiles, roofing tiles, flooring tiles, and partition tiles – be it interior or exterior.

Product Highlights

High Bonding & Shear Strength

No Water Curing Needed

Longer Pot Life

Fast Setting

No Pre Soaking of Tiles

Water Resistant

Features

Faster to apply and quicker setting time than traditional sand cement plaster.
Tensile strength of 7.6 kg/cm2 and Traverse Strength of 47 kg/cm2.
ISI and ISO certified non-combustible, high-quality products.
High Thermal Resistance R = 0.07m²K/W at 13mm thickness.

Benefit & Advantages

Gives the structure an ultra-super-white finish.
Saves time and resources.
Strengthens the structure after hardening.
Zero to Low maintenance and longer life span.
Keeps temperature down in summer and high in winter.

Specifications

Appearance	White powder
Open Time	30-35 mins.
Pot Life	2-2.5 hrs.
Coverage (1kg)	3.5-4 sq.ft. with 4mm thickness
Tensile Strength (N/mm²)	1.25 - 1.5
Shelf Life	6 months From the date of manufacturing, when stored is dry conditions

(*All tested results are under lab condition)

Usage

Glass Mosaic Tiles
Swimming Pool Tiles
Interior/Exterior Wall Tiles
Interior/Exterior Floor Tiles
Interior/Exterior Floor Stones
Interior/Exterior Wall Stones

Project – Hilton

Trimurti expert P.O.P has been an integral part of finishing and designing the interior.

Setting Time	15-20 min
Residue	2% – 4%
Whiteness	75%-80%
ISO-Certified	Yes
ISI-Certified	Yes
Wastage	NIL
Transverse Strength (kg/cm²)	18-22
Compressive Strength (N/mm²)	3-5
Density (kg/m³)	700-750
Chemical Composition	Calcium Sulphate Hemihydrate [CaSO₄.1/2H₂O]
Water to Material Ratio	1 : 1.25
Coverage (1kg)	1 sq.ft. with 12mm thickness
Shelf Life	12 months From the date of manufacturing, when stored is dry conditions

Note: Mix powder in water, not vice versa.
(*All tested results are under lab condition)

Surface Preparation

Before applying, remove any dust, loose particles, oil, traces of adhering material from the surfaces.
It’s better to use sandpaper, putty blade or wire brush to help it clean.
To achieve good workability and higher coverage always pre-wet the surface before application.
All holes and cracks on the surface of the brick wall should be repaired before plastering.
Hacking is necessary before application.

Applications

Expert Plaster is mostly applied as a protective coating on walls and ceilings.
It is also used as a molding and casting agent for decorative items and elements.
It is required to give aesthetic finishing touches to the structures that beautify them.
Because of its fire-resistant nature, it is also used to avoid fire hazards in a building.